Cheek block with a slightly curved base for mounting on a mast or boom. Can be used to re-direct a halyard or other control line. This is a direct replacement for the cheek block used on the Hobie Catฎ 16 mast for the jib halyard.Fast Tip - When replacing the Hobie Catฎ 16 block drill the head off the old rivets with a 3/16" drill bit. Once the rivet heads are off punch the remaining pieces of the rivets and rivet casings into the mast using a small punch or drift. The pieces will simply fall inside the mast. Remove the cheek block, place the replacement block over the original holes, insert the rivet casings and install your rivets.Note - Requires four 3/16" x 1/4" Pan Head Rivets (Part #244270) and four Rivet Casings for 3/16" Rivets (Part #244420) - Not Included.304 Stainless Steel & Injection Molded AcetalMax Line Size: 5/16" (8mm)Base Dimensions: 1" (25mm) x 3-1/4" (83mm)Fastener Size: 3/16" (5mm)Fastener Spacing: 2-3/4" (70mm)Sheave Diameter: 1-1/8" (29mm)Weight: 1.8 oz (51g)Width: 1" (25mm) 25-3340 - 20710000 -
Forgotten Password?Click HereFirst Time Visitor?Click here tobecome a member.