Cheek block with a slightly curved base for mounting on a mast orboom.Can be used to re-direct a halyard or other control line. This is adirect replacement for the cheek block used on the Hobie Catฎ 16 mastfor the jib halyard.Fast Tip - When replacing the Hobie Catฎ 16 block drill the head offthe old rivets with a 3/16" drill bit. Once the rivet heads are off punch theremaining pieces of the rivets and rivet casings into the mast using a smallpunch or drift. The pieces will simply fall inside the mast. Remove the cheekblock, place the replacement block over the original holes, insert the rivet casingsand install your rivets.Note - Requires four 3/16" x 1/4" Pan Head Rivets - Part #244240and four Rivet Casings for 3/16" Rivets - Part #244420 - Not Included.304 Stainless Steel & Injection Molded AcetalMax Line Size: 5/16" (8mm)Base Dimensions: 1" (25mm) x 3-1/4" (83mm)Fastener Size: 3/16" (5mm)Fastener Spacing: 2-3/4" (70mm)Sheave Diameter: 1-1/8" (29mm)Weight: 1.8 oz (51g)Width: 1" (25mm) 25-3340 - 20710000 -
Forgotten Password?Click HereFirst Time Visitor?Click here tobecome a member.