Set of four replacement, non-tapered jib battens for the HC 16 jib which have a slightly lower stiffness rating than the factory battens. This results in less hang-ups on those upwind tacks. Leech caps included.
Not class legal for Hobie Cat sanctioned racing.
Fast Tip -If you need to trim these battens use a fine tooth hacksaw. Cut through the batten half way from one side and then turn the batten over and cut the rest of the way from the other side. This will help keep the batten from splintering.

Pultruded Fiberglass
Overall Length #1: 68-7/8" (175.0cm)
Overall Length #2: 57-7/8" (147.0cm)
Overall Length #3: 45-3/4" (116.2cm)
Overall Length #4: 30" (76.2cm)
Thickness: 5/32" (4mm)
Width: 5/8" (16mm)